YINHAI—YHAYINHAI-YHA SERIES RUBBER ROLLER SEALED BEARING TRICONE BITSRECOMMENED PARAMETERS AND APPLICABLE FORMATION
| NO. | IADC | recommend parameters | application formation | |
| WOBKN/mm | RPMr/min | |||
| 1 | 114、115 | 0.3～0.75 | 180～60 | Extremely soft formation with low compressive strength and high drillability,such as clay,mudstone,cretaceous |
| 2 | 124、125 | 0.3～0.85 | 180～60 | soft formation with low compressive strength and high drillability,such as mudstone,gypsum,salinastone,soft shale and soft limestone |
| 3 | 134、135 | 0.3~0.95 | 150~60 | Soft to mid-soft formation with low compressive strength and high drillability,such as mid-soft shale，anhydrite,mid-soft limestone,mid-soft sandstone and soft formation with hard interlayer |
| 4 | 214、215 | 0.35~0.95 | 150~60 | Medium formation with high compressive strength,such as mid-soft shale，anhydrite,mid-soft limestone,mid-soft sandstone and soft formation with hard interlayer |
| 5 | 244 | 0.35～0.95 | 150~50 | Mid-hard formation with high compressive strength,such as abrasiveness shale，limestone,sandstone,dolomite and anhydrite,marble |
| 6 | 324 | 0.4～1.0 | 120~50 | Medium abrasiveness formation,such as abrasiveness shale,limestone,dolomite and anhydrite,marble |
| 7 | 515、525 | 0.35～0.9 | 180～60 | Soft formation with low compressive strength,such as mudstone,gypsum,salinastone,soft shale,soft limestone |
| 8 | 535、545 | 0.35～1.0 | 150~60 | Soft to medium formation with low compressive strength,such as mid-soft shale,mid -soft limestone,mid-soft sandstone and medium formation with harder abrasiveness interbeds |
Note :The upper limits of WOB and RPM in above table should not be used simultaneously.
YINHAI—YHAYINHAI-YHA SERISES RUBBER JOURNAL SEALED BEARING TRICONE BITS RECOMMENED PARAMETERS AND APPLICABLE FORMATION
| NO. | IADC | recommend parameters | formation | |
| WOBKN/mm | RPMr/min | |||
| 1 | 116、117 | 0.35～0.8 | 150～80 | Extremly soft formation with low compressive strength and high drillability,such clay,mudstone,cretaceous |
| 2 | 126、127 | 0.35～0.9 | 150～70 | Soft formation with low compressive strength and high drillability,such as mudstone,gypsum,salinastone,soft shale,soft limestone |
| 3 | 136、137 | 0.35～1.0 | 120～60 | Soft to mid-soft formation with low compressive strength and high drillability,such mid-soft shale,anhydrite,mid-soft limestone,mid-soft sandstone and soft formation with hard interbeds |
| 4 | 216、217 | 0.4～1.0 | 100～60 | Soft to medium formation with low compressive strength,such as mid-soft shale,mid -soft limestone,mid-soft sandstone and soft formation with hard interbeds |
| 5 | 246、247 | 0.4～1.0 | 80～50 | Mid-hard formation with high compressive strength,such as hard shale，limestone,sandstone and dolomite |
| 6 | 417、437、447 | 0.35～0.9 | 150～70 | Extremely soft formation with low compressive strength and high drillability,such as clay,mudstone,cretaceous,gypsum,salinastone,soft shale and soft limestone |
| 7 | 517、527 | 0.35～1.0 | 140～60 | soft formation with low compressive strength ,such as mudstone,gypsum,salinastone,soft shale and soft limestone |
| 8 | 537、547 | 0.45～1.0 | 120～50 | Soft to medium formation with low compressive strength,such as mid-soft shale,mid -soft limestone,mid-soft sandstone and medium formation with harder abrasiveness interbeds |
| 9 | 617、627 | 0.45～1.1 | 90～50 | Mid-hard formation with high compressive strength,such as hard shale，limestone,sandstone,and dolomite |
| 10 | 637 | 0.5～1.2 | 80～40 | Hard formation with high compressive strength,such as sandstone，limestone,dolomite and anhydrite,marble |
Note :The upper limits of WOB and RPM in above table should not be used simultaneously.
YINHAI-JYINHAI-J SERISES METAL SEALED BEARING TRICONE BITSRECOMMENED PARAMETERS AND APPLICABLE FORMATION
| NO. | IADC | recommend parameters | formation | |
| WOBKN/mm | RPMr/min | |||
| 1 | 116、117 | 0.35~0.8 | 280~80 | Extremely soft formation with low compressive strength and high drillability,such as clay,mudstone,cretaceous |
| 2 | 126、127 | 0.35~0.9 | 240~80 | Soft formation with low compressive strength and high drillability,such as mudstone,gypsum,salinastone,soft shale,and soft limestone |
| 3 | 136、137 | 0.35~1.0 | 240~60 | Soft to mid-soft formation with low compressive strength and high drillability,such mid-soft shale,anhydrite,mid-soft limestone,mid-soft sandstone and soft formation with hard interbeds |
| 4 | 417、437、447 | 0.35~0.9 | 240~70 | Extremely soft formation with low compressive strength and high drillability,such as clay,mudstone,cretaceous,gypsum,salinastone,soft shale and soft limestone |
| 5 | 517、527 | 0.35~1.0 | 220~60 | soft formation with low compressive strength ,such as mudstone,gypsum,salinastone,soft shale and soft limestone |
| 6 | 537、547 | 0.45~1.0 | 220~50 | Soft to medium formation with low compressive strength,such as mid-soft shale,mid -soft limestone,mid-soft sandstone and medium formation with harder abrasiveness interbeds |
| 7 | 617、627 | 0.45~1.1 | 200~50 | Mid-hard formation with high compressive strength,such as hard shale，limestone,sandstone,and dolomite |
| 8 | 637 | 0.5~1.1 | 180~40 | Hard formation with high compressive strength,such as sandstone，limestone,dolomite and anhydrite,marble |
Note :The upper limits of WOB and RPM in above table should not be used simultaneously.
| (TCI BITS MT BITS PACKAGING WOODEN BOX REFERENCE) | |||||
| (Sizes) | (L*W*H CM) | Wooden box weight) | TCI Net Weight | KG | |
| 4 3/4 | 16*14*25CM=0.0056 | 1 | 10 | Pallet weight 13KG | |
| 5 1/2 | 16.5*15.3*24CM=0.0060588 | 14 | |||
| 5 7/8 | 19*17*34CM=0.010982 | 1.9 | 16 | ||
| 6 | 19*17*34CM=0.010982 | 1.9 | 16 | ||
| 6 1/8 | 20*17*35CM=0.0119 | 1.9 | 18 | 18 | |
| 6 1/2 | 20*17*35CM=0.0119 | 1.9 | 19 | 18 | |
| 7 | 17 | ||||
| 7 1/2 | 24*21*41CM=0.020664 | 2.8 | 31 | 24.7 | |
| 7 7/8 | 25*22*41CM=0.02255 | 2.8 | 31.5 | ||
| 8 1/2 | 27*23.5*41CM=0.0260145 | 3 | 39 | 35 | |
| 8 3/4 | 270*235*410=0.0260145 | 4 | 40 | 38 | |
| 9 1/2 | 30*27*47CM=0.038070 | 4 | 52 | 52 | |
| 9 5/8 | 30*27*47CM=0.038070 | 4 | 61 | ||
| 9 7/8 | 30*27*47CM=0.038070 | 4 | 61 | Note:steel tooth 9 7/8 Height 38.5CM， Customization box height +3CM |
|
| 10 5/8 | 320*300*500=0.048 | 5 | 78 | Note:10 5/8 height 39CM， Customization box height +3CM |
|
| 11 3/4 | 35.5*32*54CM=0.061344 | 7 | 92 | ||
| 12 1/4 | 37*33.5*54CM=0.066933 | 7.13 | 98 | 90 | |
| 13 7/8 | 41*37*59CM=0.089503 | 8.73 | 107 | 100 | |
| 14 3/8 | 440*400*600=0.1056 | 12 | 174 | 146 | |
| 15 | 44*40*60CM=0.1056 | 12 | 151 | 170 | |
| 15 1/2 | 45.5*42.5*60=0.116025 | 14 | 200 | ||
| 16 | 470*435*660=0.134937 | 12.8 | 235 | ||
| 17 | 51*57*68CM=0.197676 | 17.3 | 250 | 205 | |
| 19 | 550*510*680=0.19074 | 20 | 280 | ||
| 20 | 58*55*68CM=0.21692 | 259 | 540*560*810=0.245 | ||
| 22 | 590*610*800=0.288 | 416 | 590*610*800=0.288 | ||
| 23 | 920*720*720 | ||||
| 24 | 670*640*850=0.364 | 488 | 670*640*850=0.364 | ||
| 26 | 930*760*760=0.537 | 750 | 553 | Steel tooth wooden box | |
| 28 | |||||
Wooden box calculation reference：drill bits L+60mm,W+30mm,H+90mm
| Drill bits Carbon box | ||
| Sizes | L*W*H CM | Weight |
| 8 1/2 | 245*240*400 | 0.9 |
| 9 1/2 | 290*270*435 | 1.1 |
| 12 1/4 | 330*320*470 | 1.6 |
| Rock Type | Rock hardness |
Rock Grade |
| mudstone | Soft | 1 |
| soft shale | ||
| tuff | ||
| gyp | ||
| sandstone | Soft | 2 |
| loose sandstone | ||
| shale | ||
| sale frozen soil | Mid-Soft | 3 |
| ice | ||
| medium hard limestone | ||
| soft sandstone | ||
| sandy shale | ||
| clay slate | Mid-Soft | 4 |
| sandy limestone | ||
| soft schist | ||
| mediun hard sandstone | Mid-Hard | 5 |
| silstone | ||
| sedimentary deposit | ||
| limestone | ||
| hard shale | ||
| medium hard limestone | Mid-Hard | 6 |
| hard limestone | ||
| serpentine rock | ||
| schist | Mid-Hard | 7 |
| dolomite limestone | ||
| hard siliceous rock | ||
| andesite | ||
| hard schist | Mid-Hard | 8 |
| mica schist | ||
| marble black granite | ||
| dolostones | ||
| diabase | ||
| pegmatite | Hard | 9 |
| hematite rock | ||
| magnetite | ||
| metamorphic schists | Hard | 10 |
| gneiss | ||
| granite | ||
| leptite | ||
| basalt diorite | ||
| gabbro | Very Hard | 11 |
| porphyry | ||
| rhyolite | ||
| trachytic | ||
| conglomerate | ||
| lron suinite | extremly Hard | 12 |
| hard sandstone | ||
| quartzite | ||
| pyrite | ||
| banded hematite | ||
| silicolite |
Yes, we can accept that, we can label the trademark and make the special packages according to the customer’s special requirement. Therefore ,we need the design paper of the packaging from our clients,including brand, marks,labels, volume,sizes,box materials etc.
